Hitachi Virtual Storage Platform F400, Руководство системного администратора, Страница: 77 / 368

User tasks
Procedure
1. Use the user name and password provided by the administrator to log in to Device
Manager - Storage Navigator.
2. Click Settings > User Management > Change Password to change the password
to your own password.
Managing user accounts
You will need to use the local administrator account created during the initial setup step,
or create administrator accounts using the procedures described in this chapter as
needed to access the storage system temporarily when the management software is not
available.
It is prudent to create more than one user account in case the system administrator is
not available when the management software becomes unavailable, or when someone
else needs to access the system. This is also helpful if multiple users need to access
Device Manager - Storage Navigator to use storage features that are not available in the
management software.
Creating user accounts
You must create a user account and register the account to a user group with
appropriate permissions.
Before you begin
■
You must have the Security Administrator (View & Modify) role to perform this task.
■
You or an authorized technical support representative can log in to Device Manager -
Storage Navigator and CCI with user accounts that are created in Device Manager -
Storage Navigator.
■
Support representatives must have the Support Personnel (Vendor Only) role to log
in.
■
The system can support a maximum of 20 user accounts, including the built-in user
accounts.
Table 3 User name and password for Device Manager - Storage Navigator
Item
Length in
characters Characters that can be used
User name 1-256
■
Alphanumeric characters
■
The following symbols:
# $ % & ' * + - . / = ? @ ^ _ ` { | } ~
Password 6-256
■
Alphanumeric characters
■
All symbols
User tasks
Chapter 4: User administration
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 77