Hitachi Virtual Storage Platform F400, Руководство системного администратора, Страница: 183 / 368

Monitoring failure information in the Windows event log
You can manage the Windows error information by outputting failure information to the
event log.
Before you begin
■
The storage system status in the storage device list must be READY.
Procedure
1. Open a Windows command prompt with administrator permissions in SVP.
2. Execute the following command to move the current directory:
cd /d C:\Mapp\wk\ model-identification-number \DKC200\mp\pc
■
The default installation directory is
C:\Mapp:
<installation-directory-of-SVP>
Note:
■
C:\Mapp
indicates the installation directory of Device Manager -
Storage Navigator. If you specified another directory, replace
C:
\Mapp:
with the specified installation directory.
■
Without moving the current directory, failure information is not
output to the Windows event log if you execute the batch file in
step 3.
■
model-identification-number : Use the format
83 <model-name><serial-
number>
, where <model-name> is one of the following:
VSP G200: 2000
VSP G400 or VSP F400, VSP G600 or VSP F600: 4000
VSP G800 or VSP F800: 6000
For example, for a VSP G600 that has the serial number 400102, the value is
834000400102
.
3. Execute the following batch file:
eventlog.bat action monitoring-period
■
action : Specify one of the following:
0: Stop outputting failure information
1: Start outputting failure information
when this parameter is omitted, 0 is set.
■
monitoring-period : If you specified 1 for action , specify the monitoring period,
from 5 to 720 minutes.
■
A space is required between
eventlog.bat
and action .
■
A space is required between action and monitoring-period .
■
The command prompt is displayed if the command finishes without any errors.
Monitoring failure information in the Windows event log
Chapter 6: Alert notifications
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 183