Hitachi Virtual Storage Platform F400, Руководство системного администратора

Страница: 157 / 368

Before you begin
■
You must have the Storage Administrator (Initial Configuration) role to perform this
task.
■
You must be logged into the SVP.
Procedure
1. Close all Device Manager - Storage Navigator sessions on the SVP.
2. Open a command prompt window with administrator permissions.
3. In the folder where the HTTP setting tool is located, execute the following
command:
C:\MAPP\wk\Supervisor\MappIniSet>MappHttpBlock.bat
4. A completion message box displays. Press any key to acknowledge the message and
close the message box.
5. Close the command prompt window.
Setting up authentication and authorization
An authentication server enables users to log in to Device Manager - Storage Navigator
with the same password as the password that they use for other applications. The
authentication server must be configured for each user.
The following figure shows the login workflow without an authentication server:
The following figure shows the login workflow with an authentication server:
If an authorization server works together with an authentication server, the user groups
that are registered in the authorization server can be assigned to a user for Device
Manager - Storage Navigator.
The following
figure shows the login workflow when an authentication server and an
authorization server are used in combination:
Setting up authentication and authorization
Chapter 5: Setting up security
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 157