manualshive.com logo in svg

Hitachi Virtual Storage Platform F400, Руководство по обслуживанию, Страница: 74 / 418

Поделиться
Скачать
Hitachi Virtual Storage Platform F400 Скачать руководство пользователя страница 74

performance data for key components of the storage system to enable

diagnostic testing and analysis for customer support.

For more information about the SVP, see the 

Service Processor Technical

Reference

.

Service processor description

The SVP runs Windows

®

 Embedded Standard 7 operating system, which

provides the same desktop environment look and feel as Windows 7

Professional.

The SVP software application can also be installed on a customer-supplied
server running Windows 7 Professional x64 Service Pack 1, Windows 10
Professional or Enterprise, or Windows Server 2012 or Windows Server 2012
R2. For more information about supported hardware, operating systems and
virtual environments, see the 

Service Processor Technical Reference for VSP

Gx00 and VSP Fx00 Models.

• Microsoft Hyper-V Windows Server 2012 R2
• VMware ESXi
• Linux KVM

Note: 

This product is also designed for IT power distribution systems with

phase-to-phase voltage.

The SVP provides four RJ-45 ports:
• Two ports connect to the storage system controllers (one port for each

controller).

• One port connects to the IP network of the user.
• One port connects to a user-supplied management console PC.

Three of the four RJ-45 ports (which connect to the controllers and the IP
network) are configured as a bridge. The SVP can be addressed using the
default IP address 192.168.0.15.

In the unlikely event you cannot connect to the SVP using the default IP
address, use the following emergency login: 

http://<default SVP IP 

address>/dev/storage/<model number><system serial number>/
emergency.do

. For example:

Storage system model number

Storage system serial number

URL

8320004

456789

http://192.168.0.15/dev/
storage/8320004456789/
emergency.do

8340004

456789

http://192.168.0.15/dev/
storage/8340004456789/
emergency.do

74

Hardware description

Service Guide for VSP Gx00 and VSP Fx00 Models

Содержание Virtual Storage Platform F400



































































































































































































































































































































































































































Отзывы:

Нет отзывов