Hitachi SA200 Series страница 88 Скачать руководство пользователя

Страница: 88 / 138

A Maintenance and Troubleshooting

SA200

Travel Recommendations

Your laptop was designed for portability. For safety and
convenience when traveling, follow these guidelines:

•

Before traveling, save your data by backing it up to
floppy disks.

•

Take along an extra backup copy of your data.

•

Do not travel with a floppy disk in the floppy disk
drive.

•

Do not travel with the laptop turned on. This may
result in loss of data and damage to the hard disk
drive.

•

Disconnect the AC adapter from the laptop.

•

Take along a spare, fully charged battery pack or the
AC adapter.

•

When carrying the laptop, take care not to drop it or
bump it into things.

Maintenance

Although the SA200 requires little physical maintenance, you
should follow a few simple maintenance routines and precautions
to help ensure that your laptop will provide outstanding
performance for many years to come.

The LCD Display

•

Avoid scratching the surface of the screen.

•

Always lower the display when the laptop is turned
off.

•

Do not allow water droplets to remain on the screen.
Water can cause permanent staining.

•

Do not expose the LCD screen to bright sunlight or
ultraviolet radiation.

•

Do not expose the LCD screen to extreme
temperatures. Freezing and liquefaction of the liquid
crystals may result in damage to the display.

lonestar.boo : sa200.fm Page 76 Friday, March 6, 1998 10:53 AM

Содержание SA200 Series











































































































































Результаты поиска

Содержание SA200 Series

Отзывы:

Похожие инструкции для SA200 Series

Бренды по названию

Популярные бренды

Hitachi SA200 Series, Руководство пользователя

Результаты поиска

Содержание SA200 Series

Отзывы:

Похожие инструкции для SA200 Series

Бренды по названию

Популярные бренды