Hitachi Roku TV 50R8, Руководство пользователя, Страница: 44 / 88

32
After starting Live TV Pause setup in any of these ways, the TV prompts you through the steps needed to enable this fea-
ture. Setup takes only a few moments.
Note : Use of a USB hub is not supported.
Using Live TV Pause
Your TV automatically detects when you connect a new device to an HDMI input and turn on its power. The input is auto-
matically added to the
Home
screen if it isn’t already present.
You can enable Live TV Pause in several ways:
• While watching a digital broadcast TV channel, press the PLAY/PAUSE button to pause or play the content. After
the TV program has been paused for 90 minutes, the TV resumes playing.
• After watching a channel for a while, press REWIND to jump back up to the point where you first started watch-
ing the channel, up to 90 minutes.
• After pausing or rewinding, press FAST FORWARD to jump ahead up to the point where you are once again
watching the live TV program.
• Press FAST FORWARD or REWIND repeatedly to cycle through 1x, 2x, and 3x skip speeds. Press the INSTANT
REPLAY button to play back the last several seconds of the program
Note :
If is not available on your remote control, you can use on the Roku App or the Jump Back button on a
universal remote.
Whenever you use any of the Live TV Pause features, the TV momentarily displays a progress bar:
1. Time at current playback position.
2. Current playback position
3. Extent of pause time, representing the amount of time this channel has been buffered, up to 90 minutes.
4. 90 minute mark, representing the maximum extent of pause time.
5. Current time.
The progress bar also displays tick marks at each half hour point, to help you locate the boundaries where one show
ends and a new one begins.