Hitachi R-D6200H Скачать руководство пользователя страница 65

Страница: 65 / 68

tin

tin

ila

When this happens

Check Item

How to solve/repair

r C

rtm

Noise is loud.
There is an abnormal
noise.

Hitting sound (thumping sound)

This is the operating sound of the electrical drawer compartment.

This is not malfunction.

Buzzing sound (whirring, grunt)

This is the operating sound of the door.

This is not malfunction.

Operation sound of the Vegetable Compartment is louder.

Operation sound of the “vegetable compartment” is louder than the “lower freezer”.

This is not malfunction.

The compartment does not
open even if the electrical
drawer switch is pressed.

Is the

light not lit? Turn on the light.

Turn on the

indicator lamp.

Pg.53

Is either one of the lower freezer or the vegetable compartment open?

Close the open electrical drawer compartment and then press drawer

switch for the compartment you want to open.

The auto door
compartment does not
open/close.

Is any food or food bag caught on the compartment?

Remove foods and others that are caught in.

Did a power failure occur or did the compartment knock against any

obstacle during electrical operation?

The door does not open/close smoothly because the electrical drawer

function is stopped before the operation completes.

Manually push in the door with strength. Otherwise, unplug the power

plug with the door drawn, and connect it after 10 seconds.

The auto door does not
open much.

The AUTO DOOR Compartment is pulled out by approx. 15 cm or more.

The length may vary depending on installation conditions, or the AUTO DOOR

Compartment may go back a little after the door is opened electrically.

This is not malfunction.

AUTO DOOR Compartment
moves even if it is locked
on the panel for operation.

AUTO DOOR Compartment can not be locked from the panel for

operation.

In order to stop AUTO DOOR Compartment function, unlock it first on the
panel for operation, and then touch

button for 3 seconds or more

until it bleeps.

Pg.53, 54

Oth

ers

Radio and/or television are
disturbed by noises.

It is caused by the electromagnetic radiation slightly generated from this

refrigerator.

Install the refrigerator away from the television, radio and interphone.
It is recommended to connect the power plug to the power outlet separated
from the antenna terminal.

Pg.43

There are thin lines like
scratches on the plastic parts.

Those lines are caused by the liquid resin flowing when plastic is

molded.

They are especially conspicuous for the transparent parts, but there is

no problem with the strength and they can never lead to any cracks.

There are waving and/or distortions on
the door surface, the side and the top
surface of the refrigerator.

Slight waving and/or distortions are generated in the manufacturing

process of the refrigerator.

They may be conspicuous according to the position of the light

source and/or the brightness etc., but there is no problem with the

performance.

The Control Panel is unlit.

Approximately 2 minutes after the end of operation, indicator lamps.

This is not malfunction.
excluding “Quick Freeze”, “Quick Cool”, “Save”, “Trip”,
“Quick”, “Water” and “eco Operation”, become unlit for
energy saves.
Open the door of the Refrigerator Compartment or touch

button to turn it on.

There is a small hole
inside the door.

This hole is used to escape the air inside

when filling the heat insulation material

into the door during the production process.

It is neither a flaw nor abnormal thing.

The electric supply failed.

Reduce the number of times of opening and closing the door and avoid

storing food additionally until the electric supply is restored.

Please check each setting on the panel for operation after the power

comes back on.

The refrigerator is not
expected to use for a long
term.