Hitachi R-D6200H, Как пользоваться инструкцией, Страница: 64 / 68

64
When this happens Check Item How to solve/repair
It s
m
ells
st
ra
ng
e
Plastic smells
This smell occurs because a lot of plastic parts are used in the
refrigerator, but the smell decreases gradually while cooling.
This is not malfunction.
Ice smells
Do the water supply container and/or water filter become dirty? Or does
ice become old?
Wash them regularly to prevent “slime” and/or “fur”. Pg.59
Chlorine may strongly smell because chlorine in tap water is condensed. This is not malfunction.
It smells in the refrigerator
Is any food which strongly smells stored without any wrapping?
The deodorizing function cannot completely remove all smells.
Seal that kind of food with plastic film etc.
Th
ere
is
so
m
eth
in
g s
tra
ng
e w
ith
th
e V
ac
uu
m
C
om
pa
rtm
en
t
Hissing sound does not
occur when opening.
Is the handle pulled up? Hold down the handle to lock.
Is the handle held down to the end and locked?
The vacuum function will not work unless it is locked.
Lock it.
Does the vacuum gasket/the support get dirty? Wipe it off them if it is dirty.
Pg.57
Is the vacuum gasket or vacuum release valve (in blue) out of place or
loosened?
Attach the vacuum gasket.
Pg.57
Attach the vacuum release valve to the hole on the handle securely.
Is a food package or a hair caught in
the vacuum gasket and the support?
Remove any packing material of foods or other things which are caught in.
Clean the vacuum gasket if it is dirty.
Pg.57
Is it immediately after opening/closing the Vacuum Compartment?
Hissing sound may not occur because the vacuum pump enters the
preparation state for starting the operation, but it does not indicate any trouble.
It is not clear whether the
Vacuum Compartment has
been vacuumized.
The Vacuum Compartment has been vacuumized properly if a vacuum
releasing sound (hissing sound) is heard when opening it.
−
The handle cannot be
locked.
Is there any food etc. caught in the inner part of the Vacuum
Compartment Case or the vacuum gasket?
Remove any food if it is caught in.
Is the Vacuum Case set in place? Attach the Vacuum Case according to the procedure. Pg.60
Booming sound and
vibration occur around the
Vacuum Compartment.
This sound is caused when the vacuum pump operates. This is not malfunction.
You can stop the vacuum pump operation when you want to stop the
sound (ex: night time).
Change the setting of the Vacuum Compartment to “Off”. Pg.47
If the sound and the vibration occur frequently, something may be
caught in the door or there may be dirt on the vacuum gasket.
Remove any packing material of foods or other things which are caught in.
Clean the vacuum gasket if it is dirty. Pg.57
Drop of water or frost
occurs in the Vacuum
Compartment.
The moisture from the juicy food may cause dew condensation and/
or frost adhering insider the compartment because the Vacuum
Compartment is sealed. It is recommended to wrap the juicy food with plastic film, etc.
Wipe dew and /or frost off with a soft cloth wet by lukewarm water.
The surface of stored
vegetables is dented or
gets discolored.
Is any vegetable sensitive to low temperature such as eggplant and
cucumber stored?
Move them to the Vegetable Compartment. Pg.47
Food in the Vacuum
Compartment freezes.
Is the Vacuum Compartment set to “Subzero” or “OFF (Non-vacuum
and -1˚C)”?
Set the “Chiller”. Pg.47
[
] d
isp
lay
on
th
e c
on
tro
l p
an
el fl
as
he
s
flashing 3 times
Food etc. may come in contact with the ice tray or the stored ice
amount detection lever.
Empty the Ice Compartment and perform “Cleaning the Ice Making”.
Pg.58
flashing
(more than 3 times)
This flashing shows that there is a problem. Consult your dealer.
flashing
It may be in the operation check mode for serviceman. (
※
1)
It will return to the normal mode after about 15 minutes. There is no
problem with using the refrigerator.
flashing
It may be in the operation check mode for serviceman. (
※
1)
It will return to the normal mode after about 10 minutes. There is no
problem with using the refrigerator.
flashing
It is in process of Ice Maker Cleaning. Read “HOW TO MAINTAIN THE AUTOMATIC ICE MAKER”.
Pg.58
flashing
It will flash if you “Off” during the ice making process. Read “HOW TO MAINTAIN THE ICE TRAY”. Pg.59
All displays flashing
Door remains open for more than 1 minute. (ex: door is not completely closed.) Check “Door Alarm”. Pg.55
Blinks other than those above
It may be in the operation check mode for serviceman. (
※
1) Consult your dealer.
TROUBLESHOOTING
(CONTINUED)
※
1 Touching the button long (more than 10 seconds), the refrigerator may go into the operation check mode.
Dew and/or frost
Waste
thread
Scraps
Vacuum release
valve (in blue)
BB0040171E_R-D6800SHMN_B.indd 64 14.5.15 10:44:01 AM