English
- 25 -
• When no module is inserted, “No Conditional
Access module detected” message appears
on the screen.
• Refer to the module instruction manual for
details of the settings.
Note: Insert or remove the CI module only when the
TV is in STAND-BY mode or SWITCHED OFF.
TV Setup
You can use this item to display the TV
functions.
The digital TV Setup menu screen is accessed
from the main menu. Press the “
M
”
button to
display the main menu and use “ ” or “ ” button
to highlight “
TV Setup
”, press the “
OK
” button
to display TV Setup menu screen.
You can fi nd detailed information for all menu
items in “Analogue TV Menu System” section.
Setup
The adjustments in this menu are given as the
following:
Confi guration
You can confi gure the settings of your TV. Select
Confi guration from Setup menu and press
OK
to view this menu. Press the
EXIT
button on the
remote control to exit.
AC3 Audio (**for EU countries only)
In the Confi guration Menu, highlight the AC3
Audio item by pressing “ ” or “ ” buttons. Use
the “ ” or “ ” buttons to set the AC3 Audio as
On or Off.
If the channel that you are watching supports
AC3 Audio, turn this setting on.
Hard of Hearing (**for EU countries only)
Use “ ” or “ ” button to select Hard of Hearing
and then press “ ” or “ ” button to set this
setting as On or Off.
If the broadcaster enables any special signal
concerning the audio, you can set this setting
as On to receive such signals.
Favourite Mode
Use this function to enable or disable favourite
mode. Press “ ” / “ ” button to set this function
as on or off.
Channel List
Use “ ” or “ ” buttons to go to Channel List
option. Use “ ” or “ ” buttons to toggle Channel
List Mode. If you select “TV Only”, with the “
” or “ ” buttons, you navigate through only TV
channels. If you select “Radio Only”, with the “ ”
or “ ” buttons, you navigate through only radio
channels. If you select “Text Only”, with the “ ”
or “ ” buttons, you navigate through only text
channels. To save the recent changes and exit;
press the “
M
” button.
Active Antenna
Use “ ” or “ ” buttons to highlight Active
Antenna option.
When antenna power option is set as On
by pressing “ ” or “ ” button, +5V will be
transmitted to the antenna output.
This feature enables the use of active
antenna.
Note: Antenna power should be “Off” when standard
antenna is used instead of the active antenna.
Scan Encrypted
Scan Encrypted Channel feature will always be
ON after performing first time installation.
When this setting is on, search process will
locate the encrypted channels as well. If it is
set as OFF manually, encrypted channels will
not be located while in automatic search or
manual search.
01_[GB]_MB35_UKIDTV_BRONZE2_37860W_1800UK_10065108_50154742.indd 25
01_[GB]_MB35_UKIDTV_BRONZE2_37860W_1800UK_10065108_50154742.indd 25
01.10.2009 11:54:09
01.10.2009 11:54:09
