Hitachi L32VC04U H, Инструкция по эксплуатации

Страница: 33 / 51

English - 32 -
Balance
This setting is used for emphasizing left or right
speaker balance.
Press “ ” or “ ” button to select Balance .
Press “ ” or “ ” button to change the level of
the balance. Balance level can be adjusted
between
-32 and + 32 .
Headphone
Press “ ” or “ ” button to select Headphone .
Press “ ” button to view the headphone
menu.
Headphone sub-menu options are described
below:
Volume
Press “ ” or “ ” button to select Volume . Press
“ ” button to increase headphone volume
level. Press “ ” button to decrease headphone
volume level. Headphone volume level can be
adjusted between 0 and 63 .
Store
Press “ ” or “ ” button to select Store. Press “
” or OK button to store the settings. “ Stored... ”
will be displayed on the screen.
Sound Mode
Press “ ” or “ ” button to select Sound Mode .
Using “ ” or “ ” button, you can select Mono,
Stereo, Dual I or Dual II mode, only if the
selected channel supports that mode.
AVL
Automatic Volume Limiting (AVL) function
adjusts the sound to obtain fi xed output level
between programmes (For instance, volume
level of advertisements tend to be louder than
programmes).
Press “ ” or “ ” button to select AVL . Press “ ”
or “ ” button to set the AVL as On or Off .
Spdif Out
Press “ ” or “ ” button to select Spdif Out .
Press “ ” or “ ” button to set the Spdif Out .
as On or Off .
Note : If Spdif Out is set to On, headphone will be
disabled.
Effect
If you are watching a mono broadcast, set Effect
on to obtain a better sound effect which will be
more stereo-like. If the current sound system is
stereo, switching this effect on will give a more
spatial effect.
Press “ ” or “ ” button to select Effect. Press
“ ” or “ ” button to set as On or Off.
Store
Press “ ” or “ ” button to select Store. Press “
” or OK button to store the settings. “ Stored... ”
will be displayed on the screen.
Feature Menu
Pip-Pap
In the Feature menu, highlight PIP item by
pressing “ ” or “ ” buttons. Press “ ” button
to enter
PIP submenu:
Using “ ” or “ ” button, you can switch to PIP,
PAP mode or turn off the feature.
If the TV is switched to PIP or PAP mode,
Pip-Pap submenu will change accordingly and
the following settings will appear on the same
menu screen.
Note that if you switch to PAP mode by using Pip-Pap
setting, only Source and Swap options will be active
among the menu settings.
01_[GB]_MB35_UKIDTV_BRONZE2_32860W_1800UK_10065397_50155740.indd 32 01_[GB]_MB35_UKIDTV_BRONZE2_32860W_1800UK_10065397_50155740.indd 32 01.10.2009 11:56:13 01.10.2009 11:56:13