Hitachi IJ RX2, Руководство по обслуживанию

Страница: 57 / 252

2-40
2.15 Upgrade option setup for RX2-S
● Functional upgrade is available with inserting upgrade key.
● The possible steps for upgrade is depending on the number of upgrade-key.
< Available upgrade steps >
Number of
Upgrade-Key
Upgrade step
0 0
1 Up to 2 steps
2 Up to 5 steps
3 Up to 8 steps
●There are five upgrade groups. For the upgrade specification of each group & step, refer to
the following table.
<Upgrade group and specification of each step>
Group
Item
Specification of each upgrade step
Step_0 Step_1 Step_2
1
Max. print line number 3ines 4lines 5lines
Font 4x5 None None Available
(Horizontal x Vertical) 5x5 Available Available Available
5x7(8), 9x7(8) Available Available Available
7x10 Available Available Available
10x12 Available Available Available
12x16 Available Available Available
18x24 None Available Available
24x32 None None Available
2 Ink drop use
1-line f/2 f/1 f/1
2-line f/2 f/1.5 f/1
(3-line) *1) (f/2) (f/1.66) (f/1)
(4/5-line) *1) (f/3) (f/2) (f/1)
3
Message length (Characters) 120 240 1000
Message storage capacity 48 150 Up to 2,000
4
Chimney printing (1-line) - Available
DIN printing (1-line) - Available
2D code printing (Data Matrix, QR code)
- Available
5
Number of calendar 2 8
Shift code - Available
Time count - Available
Calendar substitution 48 99
Number of counter 2 8
*) Available when 3-line or 4-line is selected by group 1.
[Notice]
(1) Set the upgrade option setup before creating messages, etc. at the installation procedure.
(2) If the upgrade option setup step is degraded (i.e from
“4 lines” to “3 lines”), “System reset
confirmation
” message appears and selection of following (a) or (b) are required.
(a) If the stored message has the function or setting which does not supported after
degraded specification, press <Enter> for System reset. All stored messages are
cleared.
(b) If the stored message does not have the function or setting which does not supported
after degraded specification, press <Close>. All stored messages are remained.
(*) In case of (b), if the stored message is not supported after degraded specification,
the message cannot be selected. The message name is displayed with red.
など