Hitachi HVM Navigator V03-06 Скачать руководство пользователя страница 240

Страница: 240 / 312

5-8

Usage notes

HVM Navigator User's Guide - Migration

Setting network segment assigned to activated LPARs as

migration path

When you set any of the network segments such as 1a, 1b, and so on

assigned to one or more activated LPARs as migration paths for the source and
destination HVMs and execute LPAR migration in Concurrent Maintenance

mode, the network load caused by LPAR migration in Concurrent Maintenance

mode affects the network performance on the activated LPARs. So, it’s
recommended that you set network segments which are not assigned to any

LPARs as migration paths for the source and destination HVMs.

State of NIC or FC HBA ports on destination HVM

When any of NIC or FC HBA ports are down, you cannot execute LPAR
migration in Concurrent Maintenance mode. In this case, an Error icon is

shown in Device Status row in either of the HBA configuration table or the NIC

configuration table in the Migration Config Viewer window. Then, check the
network environment on the destination HVM, link NIC and FC HBA ports and

execute LPAR migration in Concurrent Maintenance mode again.

High CPU and network load

When the following items are fulfilled and you execute LPAR migration in
Concurrent Maintenance mode, it's possible that a timeout for LPAR migration

in Concurrent Maintenance mode occur.

•

CPU usage ratio on each of the source and destination HVMs is over 80%.

•

CPU usage amount by SYS2 is over 0.8 cores.

•

There are one or more NIC ports which fulfill the following requirement on
the source or destination HVM.

–

A NIC port which is being used over 50% for the bandwidth of the NIC
port

Содержание HVM Navigator V03-06

























































































































































































































































































































Результаты поиска

Содержание HVM Navigator V03-06

Отзывы:

Hitachi HVM Navigator V03-06, Руководство пользователя, Страница: 240 / 312

Результаты поиска

Содержание HVM Navigator V03-06

Отзывы: