Table 10 Fan status LEDs
LEDs
Meaning
Red
Fan has failed, fan speed is out of acceptable range, or fan speed is
not being reported. (This LED will be on if the corresponding fan has
been removed.)
Replace the fan as soon as possible.
Off
Normal operation.
Server rear panel
The following figure shows the rear panel components for the 5200 and 5300 server
models:
Figure 5 Server rear panel components for models HNAS 5200 / 5300
The following table shows the ports and connectors on the server rear panel:
Note: Do not use any ports or connectors that are not described in this table
without guidance from technical support.
Item
Connectivity
Qty
Description
1
Clustering ports 10 GbE
4
For cluster management and
heartbeat, connect to:
■
Two-way configuration: Connect to
the corresponding cluster server
ports (left port to left port and right
port to right port).
■
N-way configuration: Connect to the
10 GbE switch.
Server rear panel
Chapter 4: Hitachi NAS Platform server components
Hitachi NAS Platform Series 5000 Hardware Reference
30
