Hitachi GR4000-160E1, Руководство по установке

Страница: 103 / 277

GS4000 Installation Guide Revision 4.00
520-10-026-30X
2-3
2.2 SETTING CONDITIONS FOR THE GS4000 MODELS
Table 2.2-1 below outlines the basic conditions required to install the GS4000 models. Users
should place the devices in the environment where all of the following conditions are satisfied.
When installing the device into a rack, the temperature inside the rack should be within the
range specified for the item “Temperature, operating” in Table 2.2-1 below.
Table 2.2-1 Installation Requirements for GS4000 Models
GS4000 Model
Item
80E1 160E1 320E (AC) 80E2 160E2 320E (DC)
Dimensions (W x D x H) in
mm 440 x 490
x 230 440 x 490
x 441
440 x 674 x 574
440 x 674
x 147 440 x 674
x 289
440 x 674 x 574
Weight (kg max) 45 80 130 40 70 120
Input voltage
Single phase
100 VAC (100 - 120V) /
200 VAC (200 - 240V)
Single phase
200 VAC
(200 - 240V)
-48 VDC (-40.5 - -57V) /
-60 VDC (-50 - -75V)
Frequency 50/60 (±1Hz) N/A
Input power required (KVA) 1.2 2.4 4.0 1.0 2.0 3.8
Heat generated (KW max) 1.1 2.2 3.8 1.0 2.0 3.8
Noise (Note 1) 55 db or less 60 dB or less 65 dB or less 55 dB or less 60 dB or less 65 dB or less
Vibration 2.45 m/s2 or less
Dust (Note 2) 5 ％ /W or less （ Note 2 ）
Temperature, operating 0
～
40
℃（
recommended value23
～
28
℃）
Temperature, non operating -10
～
43
℃
Temperature, shipping or
storage
-25
～
60
℃
Humidity, operating
10 ～ 85 ％（ recommended value45 ～ 55 ％）
Humidity, non operating 8
～
85
％
Humidity, shipping or storage 5
～
85
％（
no condensation
）
Note 1: This should be checked 1 m away from the side panel of the unit.
Note 2: Based on the measurement of falling dust. (See the section 2.7 Environmental Conditions.