Hitachi G1000 Скачать руководство пользователя страница 40

Страница: 40 / 246

Requirements and restrictions

The following table lists the requirements and restrictions for global-active

device operations.

Item

Requirements and restrictions

Storage systems at the

primary and secondary

sites

•

Model.

Virtual Storage Platform G1000 is required at the

primary and secondary sites.

•

Microcode.

Microcode (DKCMAIN) version

80-01-4x-00/00 or later is required on the primary and

secondary systems.

•

Global-active device.

The GAD feature must be

installed and enabled on the primary and secondary

systems.

•

Controller emulation type.

The controller emulation

type of the primary and secondary systems must be

same.

•

Shared memory.

Additional shared memory is required

in the primary and secondary storage systems.

External storage system

(for quorum disk)

•

The storage system must be supported for attachment to

the VSP G1000 using Universal Volume Manager.
For details, see the

Hitachi Universal Volume Manager

User Guide.

•

The maximum distance between the external storage

system and the primary site and secondary site is 1,500

km.

Licensed capacity

The licensed capacity is restricted as follows:
•

The page size assigned to the virtual volume is counted

as a licensed capacity for GAD.

•

If the actual licensed capacity exceeds the available

licensed capacity, GAD can be used as usual for 30 days.

After 30 days, only pair split and pair delete operations

are allowed.

Host server platforms

Refer to the Hitachi Data Systems interoperability matrix:

http://www.hds.com/products/interoperability

Physical paths connecting

the primary and

secondary storage

systems

•

A maximum of 8 physical paths is supported.

•

The 16FC8 package is required for the ports that connect

the primary and secondary storage systems.

•

The ports that connect the primary and secondary

storage systems must be configured as Initiator ports

and RCU target ports.

•

The maximum distance between the primary and

secondary storage systems is 1,000 km.

•

Fibre-channel interface is required.

Remote paths and path

groups

•

A maximum of 8 remote paths can be registered in a

path group.

•

A maximum of 64 path groups can be set in a storage

system (sum of the path groups used by TrueCopy,

Universal Replicator, and Universal Replicator for

Mainframe).

2-2

System requirements

Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide

Содержание G1000























































































































































































































































Результаты поиска

Содержание G1000

Отзывы:

Похожие инструкции для G1000

Бренды по названию

Популярные бренды

Hitachi G1000, Руководство пользователя

Результаты поиска

Содержание G1000

Отзывы:

Похожие инструкции для G1000

Бренды по названию

Популярные бренды