English
15
d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may a
ff
ect the power tool
ʼ
s
operation.
If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are less likely to bind and
are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed.
Use of the power tool for operations di
ff
erent from those intended could result in a
hazardous situation.
5) Service
a) Have your power tool serviced by a quali
fi
ed repair person using only identical
replacement parts.
This will ensure that the safety of the power tool is maintained.
CAUTION
Keep children and in
fi
rm persons away.
When not in use, tools should be stored out of reach of children and in
fi
rm persons.
PRECAUTIONS ON USING DRILL
1. Hold power tool by insulated gripping surfaces, when performing an operation
where the cutting accessory may contact hidden wiring or its own cord. Cutting
accessory contacting a “live” wire may make exposed metal parts of the power tool
“live” and could give the operator an electric shock.
2. When mounting the drill bit or driver bit, insert it fully into the drill chuck and
completely tighten the drill chuck with the chuck wrench.
If mounting is not done porperly, it is very dangerous as the drill bit may slip or
loosen during operation.
3. Do not wear gloves made of stu
ff
liable to roll up such as cotton, wool, cloth or
string, etc.
4. Do not touch the bit during or immediately after operation. The bit becomes very
hot during operation and could cause serious burns.
5. When placing the drill on the
fl
oor, make sure that the drill has stopped completely.
6. Hold the drill
fi
rmly with both hands when using.
7. Before drilling into a wall,
fl
oor or ceiling, thoroughly con
fi
rm that no items such as
electric cables or conduits are buried inside.
8. When working in high position, take care of downword direction.
000Book̲FD10SA̲ChS.indb 15
000Book̲FD10SA̲ChS.indb 15
2016/07/15 9:49:48
2016/07/15 9:49:48
