Port
Connected to
Default IP address
LAN1
Maintenance PC
10.0.0.100
LAN2
DKC CTL1
-
LAN3
DKC CTL2
-
LAN4
Management network
192.168.0.15
Turning on power to the physical SVP3
When turning on the power to the physical SVP3, use only the power cable supplied with
the SVP3. Do not use a power cable designed for another device.
Procedure
1. Insert the cable binder to the back of the SVP3 using the snap fastener.
2. Pass the supplied power cable through the cable binder to fix it in place.
3. Attach the power cable to the power socket on the rear panel of the SVP3.
4. Plug the other end of the power cable into an AC power source.
Turning on power to the physical SVP3
Chapter 3: Installing the SVP3
Service Processor 3 (SVP3) Technical Reference
21
