3. Insert two screws into the threaded holes in the slide area on the rail to prevent the
rail from moving.
4. Secure the long outer rail to the vertical rail at the front of the rack using a washer
and a screw on one side of the rail and a safety nut on the other side.
5. Connect the short outer rail to the vertical rail at the rear of the rack using another
washer and screw.
Repeat step 3 through step 5 on both sides of the rack.
Installing the SVP3 into the rack
After the inner rail extensions are attached to the SVP3 chassis and the outer rail
extensions are attached to the rack, the SVP3 can be installed in the rack.
Procedure
1. Align the SVP3 inner rails with the front of the horizontal outer rails on the rack.
2. Slide the SVP3 inner rails into the outer rails on the rack, keeping the pressure even
on both sides.
Installing the SVP3 into the rack
Chapter 3: Installing the SVP3
Service Processor 3 (SVP3) Technical Reference
18
