Hitachi DS 14DMR Скачать руководство пользователя страница 38

Страница: 38 / 59

--- 35 ---

Fig. 17

Position the blade of dust guard
fin (B) under the rib of housing (A).

Apply silicone rubber.

(e) Mount the DC-Speed Control Switch

[38] <35>

to housing (A) so that the protrusion of the forward/reverse

lever at the top of the switch is inserted into the hole of Pushing Button (B)

[39] <36>

. Apply silicone

grease (KS609, Shin-Etsu Chemical Co., Ltd.) to the contacting surfaces of the FET of the DC-Speed

Control Switch

[38] <35>

and Dust Guard Fin (B)

[29] <26>

then mount them to housing (A).

NOTE: (1) The temperature of the FET may be high if the silicone grease is not applied. Make sure

that the three internal wires from the FET are passed above the DC-Speed Control

Switch [38] <35> (see Fig. 17).

(2) If there is no plating and a black oxide is formed on the terminal support where the

battery contacts, replace the terminal support with new one (Code No. 323710).

Otherwise, heat is generated due to contact failure and the battery or the main body may

be faulty.

(f) Apply silicone rubber (ThreeBond 1211) to housing (A) and Inner Cover (B)

[25] <22>

as illustrated in

Fig. 17. Attach the strap to the boss as shown in Fig. 17, then mount housing (B) and tighten the eight

Tapping Screws (W/Flange) D4 x 20

[33] <30>

. Wipe off silicone rubber protruded from the housing with a

cloth.

(3) Mounting the mechanical parts

(a) Mount the Hammer

[12] <9>

containing the twenty-eight Steel Balls D3.175

[13] <10>

, Washer (J)

[14]

<11>

and Hammer Spring (F)

[15] <12>

to Spindle

[18] <15>

(b) Align the top of the cam groove on the Spindle

[18] <15>

with the steel ball guide groove on the Hammer

[12] <9>

as illustrated in Fig. 3. Press down either of the raised faces of the Hammer

[12] <9>

with a hand

press to compress Hammer Spring (F)

[15] <12>

until the end surface of the Hammer

[12] <9>

contacts

the Spindle

[18] <15>

Attach the strap to the boss.

Содержание DS 14DMR




























































Результаты поиска

Содержание DS 14DMR

Отзывы:

Hitachi DS 14DMR, Технические данные и руководство по обслуживанию, Страница: 38 / 59

Результаты поиска

Содержание DS 14DMR

Отзывы: