Hitachi DS 14DMR Скачать руководство пользователя страница 33

Страница: 33 / 59

--- 30 ---

(6) Removal of the Carbon Brushes 5 x 6 x 11.5

[31] <28>

Remove the two Brush Caps

[32] <29>

. Catch the flanges of the Carbon Brushes 5 x 6 x 11.5

[31] <28>

with

a small flat-blade screwdriver and remove the Carbon Brushes 5 x 6 x 11.5

[31] <28>

at both sides.

(7) Removal of housing (B)

Remove the seven Tapping Screws (W/Flange) D4 x 20 (Black)

[33] <30>

from the main body. The Strap

(Black)

[43] <40>

can be removed by removing the Tapping Screw (W/Flange) D4 x 20 (Black)

[33] <30>

Before removing housing (B), be sure to remove the Brush Caps

[32] <29>

because housing (B) cannot be

removed if the Brush Caps

[32] <29>

are mounted.

(8) Removal of the switch

The FET of the DC-Speed Control Switch

[38] <35>

is firmly inserted in the housing. Insert a small flat-blade

screwdriver between the FET and housing (B) to raise and remove the FET. Then, Inner Cover (B)

[25] <22>

Armature and Pinion Set

[26] <23>

, Magnet (F) Ass'y

[28] <25>

, Brush Block

[30] <27>

and DC-Speed

Control Switch

[38]

<35>

can be removed in a piece. Pushing Button (B)

[39] <36>

can also be removed.

NOTE: Be careful not to break the three legs coming from the FET to avoid malfunction of the switch.

(9) Removal of the switch assembly

Remove the two Machine Screws (W/Sp. Washer) M3 x 5

[37] <34>

that secure the flag terminal and then

disconnect the internal wires (red and black) of the Brush Block

[30] <27>

from the DC-Speed Control Switch

[38] <35>

NOTE: Do not disconnect the three FET internal wires soldered to the DC-Speed Control Switch [38]

<35>.

(10) Removal of Magnet (F) Ass'y

[28] <25>

, Dust Guard Fin (B)

[29] <26>

and Side Yoke (A)

[27] <24>

Remove Magnet (F) Ass'y

[28] <25>

in the "B" direction (see Fig. 10) holding Inner Cover (B)

[25] <22>

securely because Magnet (F) Ass'y

[28] <25>

has a strong magnetism. Dust Guard Fin (B)

[29] <26>

and

Side Yoke (A)

[27] <24>

can be easily removed from Magnet (F) Ass'y

[28] <25>

by holding Magnet (F) Ass'y

[28] <25>

securely and pulling them in the direction of diameter because they are mounted to Magnet (F)

Ass'y

[28] <25>

magnetically.

Содержание DS 14DMR




























































Результаты поиска

Содержание DS 14DMR

Отзывы:

Hitachi DS 14DMR, Технические данные и руководство по обслуживанию, Страница: 33 / 59

Результаты поиска

Содержание DS 14DMR

Отзывы: