Hitachi DS 14DMR Скачать руководство пользователя страница 32

Страница: 32 / 59

--- 29 ---

(2) Removal of Front Cap (C)

[5] <1>

and Protector (D)

[6] <2>

Insert a small flat-blade screwdriver between Front Cap (C)

[5] <1>

and Protector (D)

[6] <2>

and remove

them from the Hammer Case

[8] <4>

(3) Removal of the Hammer Case

[8] <4>

and the hammer assembly

Remove the four Tapping Screws (W/Sp. Washer) D4 x 30 (Black)

[7] <3>

that connect the Hammer Case

[8]

<4>

with Housing (A). (B) Set

[35] <32>

and remove the Hammer Case

[8] <4>

and the hammer assembly

from Housing (A).(B) Set

[35] <32>

(4) Disassembly of the hammer assembly

Washer (S)

[16] <13>

Hammer Spring
(F)

[15] <12>

Stopper (B)

[17] <14>

J-297 base for washer (S)

Fig. 8

Mount the hammer assembly onto

the J-297 base for washer (S).

With a hand press, push down the

top of the Spindle

[18] <15>

compress Hammer Spring (F)

[15]

<12>

. In this position, remove

Stopper (B)

[17] <14>

with a small

flat-blade screwdriver, then release

the hand press. (See Fig. 8.)

Remove the hammer assembly from the J-297 base for washer (S) and support the end surface of Spindle

[18] <15>

. With a hand press, push down either of the raised faces of the Hammer

[12] <9>

to compress

Hammer Spring (F)

[15] <12>

. In this position, extract the two Steel Balls D5.556

[11] <8>

from the cam

grooves of the Spindle

[18] <15>

and Hammer

[12] <9>

with a small flat-blade screwdriver. Then, slowly

release the hand press and lift the Hammer

[12] <9>

and Washer (S)

[16] <13>

together to extract them from

Spindle

[18] <15>

. Hammer Spring (F)

[15] <12>

can then be removed.

Steel ball guide groove

Spindle

[18] <15>

Hammer

[12] <9>

Raised face of hammer

Top of spindle cam

Steel Ball D5.556

[11] <8>

Fig. 9

(5) Removal of the Hook Ass'y

[40] <37>

Remove the Special Screw M5

[46] <43>

with a flat-blade screwdriver or a coin and remove the Hook Ass'y

[40] <37>

and the Hook Spring

[45] <42>

Spindle

[18] <15>

Push down.

Содержание DS 14DMR




























































Результаты поиска

Содержание DS 14DMR

Отзывы:

Hitachi DS 14DMR, Технические данные и руководство по обслуживанию, Страница: 32 / 59

Результаты поиска

Содержание DS 14DMR

Отзывы: