more features
specifications
Operating Voltage
DC 3V
10% THD power output
0.5%
S/N ratio (no filter)
55dB
Channel balance
1dB
Channel separation (no filter)
45dB
Frequency response
20Hz - 20KHz
AC/DC adaptor information:
Input
AC 230V 50Hz
Output
DC 4.5V 700mA
Polarity
+
Rechargeable batteries (not supplied):
Nickel-cadmium (end-cut sleeving)
1.2V 650mA
Because we continually strive to improve our products we may change specifications and
designs without prior notice.
taking care of your
CD player & radio
portable
compact disc
player & radio
DA-P740
CD repeat functions
Press the
Repeat button
once. The current track will
play repeatedly.
Press the
Repeat button
twice. The whole CD will play
repeatedly.
Press the
Repeat button
three times for INTRO play.
The first 10 seconds of each track will play in sequence.
Press Play/Pause while the intro is playing to hear the
whole track.
Press the
Repeat button
four times for RANDOM play.
All tracks on the CD will be played in a random order.
preset radio stations
You can store up to 10 FM and 10 AM radio stations.
Switch the
Radio/CD switch
to RADIO. Tune to your
required station. Press the
PRESET
button. “CH” flashes in
the display for about 15 seconds. While “CH” is flashing
press the
RECALL
button to select a number between 1
and 10. Press the
PRESET
button to store the station
against your chosen number.
To select one of your preset stations, press
RECALL
until
the required number appears in the display.
To turn the radio off, switch the
Radio/CD switch
to CD.
programmed CD play
You can play CD tracks in a selected order.
First press the
PLAY
button followed by the
STOP
button.
Press the
PROGRAM
button. Press the
SKIP
and
SEARCH
buttons until the number of your chosen track is
displayed. Press
PROGRAM
to confirm. Repeat these
steps to select more tracks.
Press
PLAY/PAUSE
to play your chosen selections. Press
STOP
to clear the programme.
In the unlikely event of a problem developing, please contact the store where
you purchased your CD Player & Radio.
This equipment has been designed and manufactured to meet international
safety standards but, like any electrical equipment, care must be taken if you
are to obtain the best results and safety is to be assured.
DO
read the operating instructions before you attempt to use the equipment.
DO
ensure that all electrical connections (including the mains plug, extension
leads and inter-connections between the pieces of equipment) are properly
made and in accordance with the manufacturer's instructions.
DO
consult your dealer if you are ever in doubt about the installation, operation
or safety of your equipment.
DON'T
remove any fixed cover as this may expose dangerous voltages.
DON'T
obstruct the ventilation openings of the equipment with items such as
newspapers, tablecloths, curtains, etc. Overheating will cause damage and
shorten the life of the equipment.
DON'T
allow electrical equipment to be exposed to dripping or splashing, or
objects filled with liquids, such as vases, to be placed on the equipment.
DON'T
place hot objects or naked flame sources such as lighted candles or
nightlights on, or close to equipment. High temperatures can melt plastic and
lead to fires.
DON'T
listen to headphones at high volume, as such use can permanently
damage your hearing.
DON'T
continue to operate the equipment if you are in any doubt about it
working normally, or if it is damaged in any way - switch off, withdraw the
mains plug and consult your dealer.
DON'T
use equipment such as personal stereos or radios so that you are
distracted from the requirements of traffic safety.
ABOVE ALL – NEVER let anyone especially children push anything
into holes, slots or any other opening in the case - this could result
in a fatal electrical shock.
– NEVER guess or take chances with electrical equipment of any
kind – it is better to be safe than sorry!
CAUTION
- Your CD player & radio incorporates a laser. If
you use the controls, make adjustments, alter performance,
or use the product differently from the procedures given in these
instructions you may be exposed to hazardous radiation. Do not
open any covers and do not repair yourself. Repair work must be
carried out by qualified personnel.
Cleaning
- Before cleaning this product, disconnect the mains power by
removing the 3 pin plug from the wall socket. Use a slightly moistened cloth to
clean. Do not use liquid cleaners or aerosol cleaners.
Dap740.qxd 10/07/01 11:38 Page 1
