Hitachi CR 13VBY, Технические данные и руководство по обслуживанию

Страница: 22 / 40

--- 19 ---
10. REPAIR GUIDE
10-1. Precautions in Disassembly and Reassembly
The [Bold] numbers in the description below correspond to the item numbers in the Parts List and exploded
assembly diagram for the Model CR 13VBY. Before disassembly or replacement of the saw blade, disconnect the
power cord plug from the outlet.
1. Disassembly
(1) Removal of Front Cover (D).(E) Set [6] (Fig. 1)
Remove Base Ass'y (C) [1] . Remove the five Tapping Screws (W/Flange) D4 x 25 (Black) [5] and one Seal
Lock Screw (W/Washers) M4 x 10 (Black) [11] to remove Change Knob (C) [12] and Front Cover (D).(E) Set
[6] from the main body. Take out Pushing Button (C) [8] , Base Lever (C) [7] and Pushing Spring [9] . Remove
Front Cover (D).(E) Set [6] , Base Adapter (C) [17] and Cushion Rubber (C) [18] from the main body.
(2) Removal of the saw blade mount (Fig. 2)
Slide the Cap [31] (made of rubber) out of Lever (C) [35] with fingers horizontally. Remove the Lock Nut M5
[26] and Special Bolt M5 [34] . Then Blade Holder (C) [19] , Lever (C) [35] , Blade Spring [36] , Holder Pin (B)
[32] and Spring (B) [33] can be removed from Plunger (C) [27] . At this time, be careful not to lose or damage
Spring (B) [33] .
Fig. 1
Fig. 2
[8]
[1]
[5]
[7]
[6]
[17]
[9]
[11]
[13]
[12]
[18]
[20]
[26]
[34]
[35]
[36]
[19]
[31]
[33]
[32]