Hitachi CR 13VBY, Технические данные и руководство по обслуживанию

Страница: 12 / 40

--- 9 ---
5-2. Optional Accessories
(a) High-speed steel blades
For cutting and roughing lumber
Blade No. Uses Thickness (mm)
For cutting steel pipes less than 105 mm in outer diameter 2.5 --- 6
No. 1
No. 3
No. 96
No. 95
No. 9
No. 8
No. 5
No. 4
No. 2
For cutting steel pipes less than 30 mm in outer diameter
For cutting steel pipes less than 30 mm in outer diameter
For cutting and roughing lumber
For cutting vinyl chloride pipes less than 105 mm in outer
diameter
For cutting and roughing lumber
For cutting steel pipes less than 130 mm in outer diameter
For cutting steel and stainless pipes less than 105 mm in
outer diameter
For cutting steel and stainless pipes less than 30 mm in
outer diameter
2.5 --- 6
50 --- 70
2.5 --- 6
Below 2.5
Below 2.5
Below 3.5
Below 30
Below 50
2.5 --- 15
The cutting speed of the Model CR 13VBY is substantially higher than that of the current model. However, the
conventional high-speed steel blades may be easily broken in heavy applications such as house demolition. To
cope with this problem, the bimetal blades shown in the following table are provided as optional accessories. The
bimetal blades are tough and rarely break since they are made of two different types of steels by electron-beam
welding. A very hard steel called "DM05" (JIS SKH51 or equivalent molybdenum containing high-speed steel) or
"Matrix II" (JIS SKH56 or equivalent cobalt containing high-speed steel) is used at the cutting edges, and a flexible
spring steel is used for the blade main body. Thus the bimetal blades are remarkably stronger than the
conventional high-speed steel blades.
(b) Bimetal blades
Blade No. Uses
Thickness (mm)
2.5 --- 6
2.5 --- 6
For cutting steel and stainless pipes less than 60 mm in outer diameter
No. 101
For cutting steel and stainless pipes less than 60 mm in outer diameter
No. 103
For cutting steel and stainless pipes less than 130 mm in outer diameter
No. 102
For cutting steel and stainless pipes less than 130 mm in outer diameter
No. 104
For cutting steel and stainless pipes less than 60 mm in outer diameter
No. 107
For cutting steel and stainless pipes less than 130 mm in outer diameter
No. 110
For cutting steel and stainless pipes less than 60 mm in outer diameter
No. 109
2.5 --- 6
2.5 --- 6
Below 3.5
2.5 --- 6
2.5 --- 6