Hitachi CP-X2530WN Скачать руководство пользователя страница 50

Страница: 50 / 118

SCREEN menu

SCREEN menu

From the SCREEN menu, items shown in the table

below can be performed.

Select an item using the ▲/▼ cursor buttons, and press

the ► cursor button or

ENTER

button to execute the

item. Then perform it according to the following table.

Item

Description

LANGUAGE

Using the ▲/▼/◄/► buttons switches the OSD (On Screen

Display) language.

ENGLISH

FRANÇAIS

DEUTSCH

ESPAÑOL

(shown in the LANGUAGE dialog)

Press the

ENTER

INPUT

button to save the language setting.

MENU POSITION

Using the ▲/▼/◄/► buttons adjusts the menu position.

To quit the operation, press the

MENU

button on the remote control

or keep no operation for about 10 seconds.

BLANK

Using the ▲/▼ buttons switches the mode for the blank screen.

The blank screen is a screen for the temporarily blanking feature (



It is displayed by pressing the

BLANK

button on the remote control.

MyScreen

ORIGINAL

BLUE

WHITE

BLACK

MyScreen : Screen can be registered by the MyScreen item (



ORIGINAL : Screen preset as the standard screen.

BLUE, WHITE, BLACK : Plain screens in each color.

• To avoid remaining as an afterimage, the MyScreen or ORIGINAL

screen will change to the AUTO BLANK screen after several minutes.

AUTO BLANK

Using the ▲/▼ buttons switches the mode for the AUTO BLANK

screen.

BLUE

WHITE

BLACK

• To avoid remaining as an afterimage, displayed image will change

to the designated blank color screen by AUTO BLANK after several

minutes at the following conditions.

- When MyScreen or ORIGINAL is displayed as BLANK screen.

- When start-up screen is displayed.

(continued on next page)

Содержание CP-X2530WN























































































































Результаты поиска

Содержание CP-X2530WN

Отзывы:

Hitachi CP-X2530WN, Руководство пользователя, Страница: 50 / 118

Результаты поиска

Содержание CP-X2530WN

Отзывы: