Hitachi Copy-on Write SnapShot Скачать руководство пользователя страница 48

Страница: 48 / 90

6–6

Using SnapShot

Hitachi Simple Modular Storage Copy-on-Write SnapShot User’s Guide

Use the V-VOL for Tape Backup, Testing, Reports, Etc.

Your snapshot image (V-VOL) can be used to fulfill a number of data

management tasks performed on a secondary server. These management

tasks include backing up production data to tape, using the data to develop

or test an application, generating reports, populating a data warehouse, and

so on.

Whichever task you are performing, the process for preparing and making

your data available is the same. The following process can be performed

using the Navigator 2 GUI or CLI, in combination with an operating system

scheduler. The process should be performed during non-peak hours for the

host application.

To use the V-VOL for secondary functions

1. Un-mount the V-VOL. This is only required if the V-VOL is currently being

used by secondary server.

2. Resync the pair before stopping or quiescing the host application. This

is done to minimize the down time of the production application.
- Navigator 2 GUI users, please see the resync pair instruction in

Update the V-VOL on page 6-4

- Advanced users using CLI, please see the resync pair instruction in

Updating SnapShot Logical Unit on page A-6

•

3. When pair status becomes “Paired”, shut down or quiece (quiet) the

production application, if possible.

4. Split the pair. Doing this insures that the backup will contain the latest

mirror image of the P-VOL.
- Navigator 2 GUI users, please see the split pair instruction in

Update the V-VOL on page 6-4

- Advanced users using CLI, please see the split pair instruction in

Updating SnapShot Logical Unit on page A-6

5. Un-quiesce or start up the production application so that it is back in

normal operation mode.

6. Mount the S-VOL (V-VOL) on another server.
7. Run the backup program using the snapshot image (V-VOL).

•

NOTE:

Some applications can continue to run during a backup operation,

while others must be shut down. For those that stay running (placed in

backup mode or quiesced rather than shut down), there may be a

performance slowdown on the P-VOL.

NOTE:

When performing read operations against the snapshot image (V-

VOL), you are effectively reading from the P-VOL. This extra I/O on the P-

VOL affects the performance.

Содержание Copy-on Write SnapShot



























































































Результаты поиска

Содержание Copy-on Write SnapShot

Отзывы:

Похожие инструкции для Copy-on Write SnapShot

Бренды по названию

Популярные бренды

Hitachi Copy-on Write SnapShot, Руководство пользователя

Результаты поиска

Содержание Copy-on Write SnapShot

Отзывы:

Похожие инструкции для Copy-on Write SnapShot

Бренды по названию

Популярные бренды