manualshive.com logo in svg

Hitachi Copy-on Write SnapShot, Руководство пользователя, Страница: 4 / 90

Поделиться
Скачать
Hitachi Copy-on Write SnapShot Скачать руководство пользователя страница 4

iv

Preface

Hitachi Simple Modular Storage Copy-on-Write SnapShot User’s Guide

Document Revision Level

This section provides a history of the revision changes to this document.

•

Safety and Warnings

This document uses the following symbols to draw attention to important 

safety and operational information. The Danger, Electric Shock, and ESD 

symbols are included only in hardware manuals.

•

Intended Audience

This document is intended for users with the following background:
• Background in data processing and understands RAID storage systems 

and their basic functions.

• Familiarity with Hitachi Modular Storage systems.
• Familiarity with operating systems such as the Windows 2000, Windows 

Server 2003 operating system, or UNIX.

Product Version

This document applies to Hitachi Simple Modular Storage 100 microcode 

versions 1810/A and higher.

Release Notes

Make sure to read the Release Notes before enabling and using this product. 

The Release Notes are located on the installation CD. They may contain 

requirements and/or restrictions that are not fully described in this 

document. The Release Notes may also contain updates and/or corrections 

to this document.

Revision

Date

Description

MK-97DF8018-00

October 2007

Initial Release

Symbol

Meaning

Description

•

Tip

Tips provide helpful information, guidelines, or suggestions for 
performing tasks more effectively.

•

Note

Notes emphasize or supplement important points of the main 
text.

•

Caution

Cautions indicate that failure to take a specified action could 
result in damage to the software or hardware.

Содержание Copy-on Write SnapShot



























































































Отзывы:

Нет отзывов