Hitachi Compute Blade 500 Series Скачать руководство пользователя страница 2

Страница: 2 / 506

No part of this publication may be reproduced or transmitted in any form or by any means,

electronic or mechanical, including photocopying and recording, or stored in a database or retrieval

system for any purpose without the express written permission of Hitachi, Ltd.

Hitachi, Ltd., reserves the right to make changes to this document at any time without notice and

assumes no responsibility for its use. This document contains the most current information available

at the time of publication. When new or revised information becomes available, this entire

document will be updated and distributed to all registered users.

Some of the features described in this document might not be currently available. Refer to the most

recent product announcement for information about feature and product availability, or contact

Hitachi Data Systems Corporation at

https://portal.hds.com

Notice: Hitachi, Ltd., products and services can be ordered only under the terms and conditions of

the applicable Hitachi Data Systems Corporation agreements. The use of Hitachi, Ltd., products is

governed by the terms of your agreements with Hitachi Data Systems Corporation.

Hitachi is a registered trademark of Hitachi, Ltd., in the Rollback Configuration United States and

other countries. Hitachi Data Systems is a registered trademark and service mark of Hitachi, Ltd., in

the United States and other countries.

Archivas, Essential NAS Platform, HiCommand, Hi-Track, ShadowImage, Tagmaserve, Tagmasoft,

Tagmasolve, Tagmastore, TrueCopy, Universal Star Network, and Universal Storage Platform are

registered trademarks of Hitachi Data Systems Corporation.

AIX, AS/400, DB2, Domino, DS6000, DS8000, Enterprise Storage Server, ESCON, FICON,

FlashCopy, IBM, Lotus, MVS, OS/390, RS6000, S/390, System z9, System z10, Tivoli, VM/ESA,

z/OS, z9, z10, zSeries, z/VM, and z/VSE are registered trademarks or trademarks of International

Business Machines Corporation.

All other trademarks, service marks, and company names in this document or website are

properties of their respective owners.

Microsoft product screen shots are reprinted with permission from Microsoft Corporation.

Hitachi Compute Blade 500 Series EFI User's Guide

Содержание Compute Blade 500 Series



























































































































































































































































































































































































































































































































Результаты поиска

Содержание Compute Blade 500 Series

Отзывы:

Похожие инструкции для Compute Blade 500 Series

Бренды по названию

Популярные бренды

Hitachi Compute Blade 500 Series, Руководство пользователя

Результаты поиска

Содержание Compute Blade 500 Series

Отзывы:

Похожие инструкции для Compute Blade 500 Series

Бренды по названию

Популярные бренды