Hitachi Compute Blade 2500, Руководство по началу работы

Страница: 70 / 154

5
.
In the Set IP Address dialog box, from the Connection Type drop-down
list under the switch module field, select Connect Directly from the
Management LAN.
Now you can enter the IP address, subnet mask, and default gateway for
the switch modules.
6
.
In the Set IP Address dialog box, enter the IP addresses in the fields of
the switch modules.
Complete the IP Address, Subnet Mask, and Default Gateway fields.
Ensure that the IP addresses that you have entered will not conflict with
the resources that you will connect to the management LAN network
later.
Repeat steps 5 and 6 for each of the switch modules installed on the
system unit.
7
.
In the Set IP Address dialog box, click the Confirm button.
A dialog box is displayed, prompting you to confirm the content of the
settings. If the settings are correct, click the OK button.
Setting a user account for the LAN switch module
To manage the LAN switch module, it is recommended that you reset the
default password for the user account of the switch (default ID is "admin") to
ensure the security for the switch. To do this, follow the procedure described
below.
1
.
Log in to the switch module.
2
.
Reset the password for the initial "admin" account.
3
.
Log out from the switch module.
To reset the default password for the switch, use the terminal software to
access the management functionality of the LAN switch module.
Logging in to the switch module.
1
.
From the system console, open the terminal software.
2
.
In the terminal software, specify the IP address of the desired switch
module and connect to the switch module.
You use telnet or SSH (version2) for a connection protocol by default.
3
.
From the terminal software, access the management functionality of the
switch module.
4
.
When the terminal software displays the prompt
login:
type
admin
and
press Enter.
The following response is displayed:
password:
5
.
Type
admin
and press Enter.
You are now successfully logged in.
3-8
Starting the CB 2500 and Performing Initial Setup
Hitachi Compute Blade 2500 Series Getting Started Guide