Hitachi Compute Blade 2500, Руководство по началу работы

Страница: 66 / 154

management module that is operating as the active system by the MM
MSR LED on the management modules.
For the connection, use a LAN cable of category 5 or higher. You can use
either a straight-through cable or a crossover cable. The communication
rate of the LAN port for the system console is selected automatically.
• If IPv4 address assign mode is DHCP, do the following:
Use a LAN cable to connect MGMT1 port of the management LAN module
to the external management LAN. The active management module and
server blade BMCs will request IP address and subnet mask via DHCP.
You can check the IP addresses assigned to the management module and
server blade BMCs by either the following means.
¢
When the management module and server blade BMC requests IP
address, they send their hostnames to the DHCP server. You can
check the hostnames in the logs of the DHCP server to know which IP
address is assigned to those modules. The default hostname is a
string like the following.
Management module:
323GG-RE4xxxxxx-Yxxxxxxxx
Server blade BMC:
323GG-RV3xxxxxxxx-Yxxxxxxxx
¢
Use the serial port of the management module to log in to CLI console
and run
show mgmt-module mgmt-lan
and
show blade mgmt-lan
commands to show the IP addresses.
Connecting by using an RS232C cable
Use a generic RS232C cable to connect the serial port of the management
module to that of the system console.
Management LAN when LPAR manager is used
If you use LPAR manager, you need to configure the setting so that the
management module and LPAR manager can communicate through the
management LAN. This section describes the management LAN when the
LPAR manager functionality is used.
• Connect the MGMT1 port of the management LAN module to the
management LAN.
• Connect the MGMT1 port of the standby management LAN module to the
management LAN in case a failure occurs in the active management
module or management LAN module.
• Connect the network device used by LPAR manager for management
communications, to the management LAN. See the related topics for
more information.
3-4
Starting the CB 2500 and Performing Initial Setup
Hitachi Compute Blade 2500 Series Getting Started Guide