Hitachi Compute Blade 2500 Скачать руководство пользователя страница 129

Страница: 129 / 154

Taking a memory dump in Linux

This section describes how to take a memory dump in Linux.

Failure detection in Red Hat Enterprise Linux

The standard settings of Red Hat Enterprise Linux prevent the OS from

stopping even if an NMI occurs. Therefore, configure the settings of Red Hat

Enterprise Linux so that a kernel panic occurs when an NMI is issued. For

details, see Help or the documentation for the OS.

Note: In Red Hat Enterprise Linux, if "Function to stop the system

immediately when an MNI is received" is enabled, the CPU hang-up detection

functionality and kernel profile functionality cannot be used at the same time.

Taking a memory dump in Red Hat Enterprise Linux

To use the kdump memory dump functionality of Red Hat Enterprise Linux to

take a memory dump, perform the following procedure. If you use the

reliable memory dump functionality Linux Tough Dump, see the

documentation for Linux Tough Dump.

Triggers for taking a memory dump

When an OS failure (such as kernel panic) occurs, a memory dump is taken

automatically. Also, when the system is hung up, the management module

issues an MNI to take a memory dump.

While a memory dump is being taken

The progress is displayed on the screen as a percentage while a memory

dump is being taken. When the percentage reaches "100%", the memory

dump is complete. When the memory dump is complete, if the OS does not

restart automatically, restart it manually.

After a memory dump is taken

After the system is restarted, make sure that the memory dump was taken.

The output destination of the memory dump is

/var/crash/

date

time

(initial setting

). date and time show the date and time when the memory

dump was taken.

If the output destination of the memory dump file has been changed from

the default setting, you can check it in the OS setting file

/etc/

kdump.conf

Taking a memory dump with VMware

This section describes the procedure to take a memory dump with VMware.

Taking a Memory Dump of the OS Running on a Server Blade

B-5

Hitachi Compute Blade 2500 Series Getting Started Guide

Содержание Compute Blade 2500



























































































































































Результаты поиска

Содержание Compute Blade 2500

Отзывы:

Похожие инструкции для Compute Blade 2500

Бренды по названию

Популярные бренды

Hitachi Compute Blade 2500, Руководство по началу работы

Результаты поиска

Содержание Compute Blade 2500

Отзывы:

Похожие инструкции для Compute Blade 2500

Бренды по названию

Популярные бренды