background image

 

 

ENG

L

IS

H

 

 

 

CAUTION 

Contact with Metal and Other Edges 

When moving the computer be careful when coming in contact with the plastic and metal 
edges. It is possible to be injured. 

 

Use in Unstable Places 

DO NOT place on sloping or narrow areas that are unstable. The device may drop or fall 
and cause injury. 

Display Cable 

Arrange the cables so that they are out of the way. If a cable is tripped on, it may 
cause injury and damage to the connected devices.   

DO NOT place heavy objects on the cable. Additionally, do not place objects that 
generate heat near the cables. The cable casing may break and cause damage to 
the devices that are connected. 

Stand   

When adjusting the angle, hold the top left and right edges with both hands and 
move slowly. Using only one hand may cause it to fall. 

DO NOT place your hand near the stand when adjusting the LCD forward or back. 
Your fingers may get caught and cause injury. 

Eyestrain 

When continuously looking at the display while working, keep the work area lighted at 
300 – 1000 Lexes. Additionally, for every hour of work, rest 10 to 15 minutes. 
Continuously looking at the display for prolonged periods will cause accumulated eye 
fatigue. 

Disposal of this Product 

When disposing of this product, confer with the dealer where this product was purchased 
or refer to laws of the local government or regulations regarding disposal. 

Содержание CML174SXWB

























Отзывы: