manualshive.com logo in svg

Hitachi AMS 2100, Руководство по обслуживанию, Страница: 25 / 192

Поделиться
Скачать
Hitachi AMS 2100 Скачать руководство пользователя страница 25

Safety guidelines

xxv

Hitachi AMS 2000 Family Storage System Service Guide

Safety and warning labels

In this equipment, warning labels at pasted on areas requiring special care. 

Warnings written on them are primarily for service personnel. The following 

table shows the symbols contained in warning labels.

Table 1:  Warning Labels

Symbol

Meaning

Description

Caution

Cautions indicate that failure to take a specified action could 
result in damage to the software or hardware.

WARNING

Warnings indicate that failure to take a specified action could 
result in loss of data or serious damage to the hardware.

DANGER

The Danger symbol warns users of possible injury or death if 
instructions are not followed. 

cv

ELECTRIC 
SHOCK 
HAZARD!

This symbol warns users of electric shock hazard. Failure to 
take appropriate precautions such as not opening or touching 
hazardous areas of the equipment could result in injury or 
death.

Electrostatic 
Sensitive

The ESD symbol warns users that the equipment is sensitive 
to electrostatic discharge (ESD) and could be damaged if 
users do not take appropriate precautions such as using a 
grounded wrist strap when touching or handling the 
equipment.

Burn Hazard

HOT SURFACE! Turn off power and allow to cool before 
touching.

No 
Screwdrivers

Do not disassemble the equipment.

Heavy

Handle the heavy equipment carefully.

Caught 
Fingers

Be careful that your fingers do not get caught in moving parts.

Equipment 
Safety

Do not put anything on top of an array that is partially out of 
a rack.

Содержание AMS 2100

































































































































































































Отзывы:

Нет отзывов