Hitachi AMS 2100, Руководство по оборудованию

Страница: 238 / 306

7–56
Configuration
Hitachi AMS 2100/2300 Storage System Hardware Guide
•
Set the time zone from the pull-down list in the Edit Time Zone & NTP. You
can set the checkbox to adjust the array clock for daylight saving time
(summer time) depending on the time zone.
If you use an NTP server, check the checkbox and enter the IP address of
the NTP server. You can register up to two NTP servers (server1 and server
2). The array management port must be able to communicate with the NTP
servers. Once a day, the array queries server 1 and adjusts the array clock.
If the array cannot communicate with server 1, the array queries server 2
and adjusts the array clock.
After changing the setting, click Refresh Information in the Date & Time
window for a while, and check whether the date and time are set as
specified and the result of the synchronization with the NTP server.
Refresh Information
This button updates the items shown in the Date & Time window.
Other storage management operations
Other storage management operations include creating, deleting, and
managing host groups, logical units (LUNs) and data pools, LUN expansion,
See Navigator 2 features on page 7-11 and Storage features on page 7-12
for a complete list of the features supported on an AMS 2100/2300.
These operations are described in detail in the Hitachi Navigator Modular 2
(SNM2) Storage Features Consolidated User’s Guide that is included on the
documentation CD that is shipped with the array. In addition, the Navigator
2 online help included detailed procedures to use these features.