Hitachi 3080 G1, Справочник по аппаратуре

Страница: 63 / 138

c. Save the registry file to a location on your computer.
d. Verify that the archive file can be opened and the contents can be
extracted.
5. Backup the SMU Configuration - External SMU ONLY.
a. In the GUI, navigate to
SMU Administration > SMU Backup and
Restore
b. Click Backup SMU: Backup .
c. Save the configuration file to a location on your computer.
d. Verify that the archive file can be opened and the contents can be
extracted.
6. Collect Diagnostics from the cluster.
a. Navigate to
Home > Status and Monitoring > Download
Diagnostics
b. Check only the check boxes and radio button shown below .
c. Click download .
d. Save to a location on your computer.
e. Verify that the archive file can be opened and the contents can be
extracted.
f. If the archive file contains the words "MISSING_FILES", repeat step 6.
If this does not resolve the issue, then check that both nodes are fully
operational and resolve any issues identified before repeating the
procedure.
Resetting the battery age and restarting the chassis monitor
Reset the battery age and Restart the Chassis Monitor as necessary.
Procedure
1. Connect a serial cable to the serial port of the node with the new battery.
2. Open a putty application and set up a serial console session.
a. Select the
Serial Radio button.
b. Enter the COM port that your serial dongle is using.
c. Enter
115200
in the Speed box.
d. Click Serial in the Category Tree on the left.
Replacing server components 63
Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference