English
23
ACCESSORIES
WARNING:
Accessories for this power tool are mentioned in this Instruction Manual.
The use of any other attachment or accessory can be dangerous and
could cause injury or mechanical damage.
NOTE:
Accessories are subject to change without any obligation on the part of the HITACHI.
STANDARD ACCESSORIES
(1) Allen wrench (For M5 hexagon socket bolt) ............................... 1 (attached to unit)
(2) One set of cutters .......................................................................... 1 (attached to unit)
(3) Deflection guard ............................................................................ 1
OPTIONAL ACCESSORIES.......
sold separately
WARNING:
Do not bend the rebar with #5 (5/8” in diameter) using the center roller
set (D38) and center roller set (D50).
Otherwise, there is a fear that the rebar may snap.
(1) Cutter (Fig. 25)(Code No. 319706)
* One set containing two pieces
Fig. 25
(2) Center Roller (D 50) Set (Fig. 26)(Code No.
321446)
* This is used when the bending diameter
of a rebar is changed to (bent diameter:
ø50 mm).
(3) Center Roller (D 38) Set (Fig. 26)(Code No. 321445)
* This is used when the bending diameter of a rebar is changed to (bent diameter: ø38
mm).
NOTE:
Specifications are subject to change without any obligation on the part of the
HITACHI.
Fig. 26
Fig. 27
2" (50 mm)
1-1/2" (38 mm)
