![Hirschmann OWL 4G Australia Скачать руководство пользователя страница 27](http://html1.mh-extra.com/html/hirschmann/owl-4g-australia/owl-4g-australia_user-manual_2138042027.webp)
6.6.4 Antenna Connector ANT, DIV, GNSS and WiFi
The main and diversity antennas are connected to the router using the SMA connectors on
the front panel. There are also two R-SMA connectors for connection of the WiFi antennas and
one SMA connector for connection of the GNSS antenna on the right panel of the router (on
WiFi and GNSS versions of router only).
The
ANT
connector is used to connect the main antenna to the router. To connect the diver-
sity antenna, the second antenna connector
DIV
is used. The R-SMA connectors named
WiFi1
and WiFi2
are designed for the connection of a WiFi antennas (available only for versions with
a WiFi module). The
GNSS
connector is used to connect the GNSS antena (available only for
versions with a WiFi module, too).
The router can not operate without a main antenna connected through the port marked as
ANT
.
The SMA connector is used for the connection of the antenna. Recommended tightening mo-
ment for screwing the antenna to SMA connectors is 0.9 Nm.
Figure 16: Connecting the antenna
The diversity antenna improves the radio capability of the router at low signal strength.
UM Installation OWL 4G Europe
Release 01 - 08/2019
27