Hirschmann OpEdge-8D, Руководство пользователя

Страница: 41 / 44

Installation OpEdge-8D
Release 01 10/2022
41
8 Accessories
Note that products recommended as accessories may have different
characteristics to those of the device, which may limit the application range
of the overall system. For example, if you add an accessory with IP20 to a
device with IP65, the IP of the overall system is reduced to IP20.
Note: Operate OpEdge-8D devices with fiber optic SFP transceivers only.
Copper SFP transceivers are inadmissible.
Name Order number
Terminal cable 942 097-001
6-pin terminal block (50 pieces) for supply voltage 943 845-013
2-pin terminal block (50 pcs.) for signal contact 943 845-010
Gigabit Ethernet SFP transceiver Order number
The following operating conditions apply to twisted pair transceivers:
 Longer RSTP switching times and link loss detection times compared to twisted pair ports
provided by the device directly.

Not applicable for combo and Fast Ethernet ports.

Only support of the autonegotiation mode including autocrossing.
M-SFP-SX/LC 943 014-001
M-SFP-SX/LC EEC 943 896-001
M-SFP-MX/LC EEC 942 108-001
M-SFP-LX/LC 943 015-001
M-SFP-LX/LC EEC 943 897-001
M-SFP-LX+/LC 942 023-001
M-SFP-LX+/ LC EEC 942 024-001
M-SFP-LH/LC 943 042-001
M-SFP-LH/LC EEC 943 898-001
M-SFP-LH+/LC 943 049-001
M-SFP-LH+/LC EEC 942 119-001
SFP-GIG-LX/LC
a
a. Further information on certifications can be found on the Internet at the Hirschmann product
pages (www.hirschmann.com).
942 196-001
SFP-GIG-LX/LC EEC 942 196-002
Bidirectional Gigabit Ethernet SFP transceiver Order number
SFP-GIG BA LX/LC EEC
a
942 207-001
SFP-GIG BB LX/LC EEC
a
942 207-002
SFP-GIG BA LX+/LC EEC
a
942 208-001
SFP-GIG BB LX+/LC EEC
a
942 208-002
SFP-GIG BA LH/LC EEC
a
942 209-001
SFP-GIG BB LH/LC EEC
a
a. Further information on certifications can be found on the Internet at the Hirschmann product
pages (www.hirschmann.com).
942 209-002