Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS, Руководство пользователя

Страница: 58 / 196

Loading/saving settings
58
3.2 Saving settings
Layer 2 Enhanced with Layer 2 Professional
Release 1.0 10/05
3.2.2 Saving into a file
The Switch allows you to save the current configuration data in a file in the
connected network.
V
Select the
Basics:Load/Save
dialog.
V
Click in the “Save”-frame “to URL”.
V
Type in the “URL” edit field the path under which you want the Switch
to save the configuration file.
V
Click “Save configuration”.
The URL marks the path to the tftp server on which the Switch saves the
configuration file. The URL is written as follows:
tftp://IP address of the tftp server/path name/file name,
(e.g.
tftp://149.218.112.5/switch/config.dat
).
Note: The configuration file contains all configuration data, including the
password. Thus, note the access rights on the tftp server..
V
Enter the
enable
command to change to the Priviledged EXEC
mode.
V
Enter the command
copy nvram:startup-config tftp://149.218.112.159/
switch/config.dat
if you want the switch to load the current con-
figuration data from a tftp server in the connected network.