manualshive.com logo in svg

Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS, Руководство пользователя

Поделиться
Скачать
Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS Скачать руководство пользователя страница 52

Loading/saving settings

52

3.1 Loading settings

Layer 2 Enhanced with Layer 2 Professional

Release 1.0 10/05

3.1 Loading settings

During restart, the Switch automatically loads its configuration data from the 
local non-volatile memory, provided that you have not activated BOOTP/
DHCP and that no ACA is connected to the Switch.

During operation, the Switch enables you to load settings from the following 
sources:

D

the local non-volatile memory,

D

the AutoConfiguration Adapter. If an ACA is connected to the Switch, the 
Switch always loads its configuration from the ACA.

D

a file in the connected network (= state on delivery) and

D

the state on delivery.

Note: 

When loading a configuration, do not access the Switch until it has 

loaded the configuration file and has made the new configuration settings. 
Depending on the complexity of the configuration settings, this procedure 
can last between 10-200 seconds.

Содержание MS30, Power MICE, MACH 4000, OCTOPUS





































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды