manualshive.com logo in svg

Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS, Руководство пользователя

Поделиться
Скачать
Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS Скачать руководство пользователя страница 117

Traffic control

Layer 2 Enhanced with Layer 2 Professional

Release 1.0 10/05

8.4 Prioritization

115

8.4.2 Strict Priority

With  Strict priority, the Switch sends all data packets with a higher priority 
level before it sends a data packet with the next lower priority level. Thus the 
Switch does not send a data packet with the next lower priority until there are 
no other data packets waiting in the  queue.

8.4.3 Tagging

The VLAN tag is integrated into the MAC data frame for the VLAN and prio-
ritization functions in accordance with the IEEE 802.1 Q standard. The VLAN 
tag consists of 4 Bytes. It is inserted between the source address field and 
the type field.

With data packets with VLAN tag, the Switch evaluates 

D

the priority information at all times, and

D

the VLAN information, if VLANs have been set up.

Data packets whose VLAN tags contain priority information but no VLAN 
information (VLAN ID = 0) are known as “Priority Tagged Frames”.

Содержание MS30, Power MICE, MACH 4000, OCTOPUS





































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды