manualshive.com logo in svg

Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS, Руководство пользователя

Поделиться
Скачать
Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS Скачать руководство пользователя страница 104

Traffic control

102

8.1 Directed frame forwarding

Layer 2 Enhanced with Layer 2 Professional

Release 1.0 10/05

8.1 Directed frame forwarding

Directed frame forwarding is a method used by the Switch to avoid unneces-
sary increases in the network load. The Switch features the following directed 
frame forwarding functions:

D

Store-and-forward

D

Multiadress capability

D

Aging of learned addresses

D

Static address entries

8.1.1 Store-and-forward

All data received by the Switch is stored, and its validity is checked. Invalid 
and defective data packets (> 1,522 Bytes or CRC errors) as well as frag-
ments (< 64 Bytes) are discarded. Valid data packets are forwarded by the 
Switch.

8.1.2 Multi-address capability

The Switch learns all the source addresses for a port. Only packets with

D

unknown addresses

D

these addresses or

D

a multi/broadcast address

in the destination address field are sent to this port. The Switch enters 
learned source addresses in its filter table (see 

“Entering static address ent-

ries” on page 104

).

Содержание MS30, Power MICE, MACH 4000, OCTOPUS





































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды