Hirschmann MACH 1000, Справочное руководство

Страница: 23 / 572

Command Structure
CLI L2P
Release 7.0 05/2011
1.1 Format
23
1.1.2 Parameters
Parameters are order dependent.
Parameters may be mandatory values, optional values, choices, or a combi-
nation.
D
<parameter>
. The <> angle brackets indicate that a mandatory param-
eter is to be entered in place of the brackets and text inside them.
D
[parameter]
. The [] square brackets indicate that an optional parame-
ter may be entered in place of the brackets and text inside them.
D
choice1 | choice2
. The | indicates that only one of the parameters
should be entered.
D
The {} curly braces indicate that a parameter must be chosen from the list
of choices.
1.1.3 Values
macaddr The MAC address format is six hexadeci-
mal numbers separated by colons, for
example 00:06:29:32:81:40.
areaid Area IDs may be entered in dotted-decimal
notation (for example, 0.0.0.1). An area ID
of 0.0.0.0 is reserved for the backbone.
Area IDs have the same form as IP
addresses, but are distinct from IP
addresses. The IP network address of the
sub-netted network may be used for the
area ID.
slot/port Valid slot and port number separated by
forward slashes. For example, 1/1 repre-
sents slot number 1 and port number 1.
logical slot/port Logical slot and port number. This is appli-
cable in the case of a link-aggregation
(LAG) and vlan router interfaces (9/x). The