Hirschmann GREYHOUND GRS1020, Справочное руководство

Страница: 550 / 619

Operation diagnosis
13.11 Reports
210
UM Config GRS
Release 8.0 09/2019
13.11 Reports
The following lists reports and buttons available for diagnostics:

System Log file
The log file is an HTML file in which the device writes device-internal events.

Audit Trail
Logs successful commands and user comments. The file also includes SNMP logging.

Persistent Logging
When the external memory is present, the device saves log entries in a file in the external
memory. These files are available after power down. The maximum size, maximum number of
retainable files and the severity of logged events are configurable. After obtaining the user-
defined maximum size or maximum number of retainable files, the device archives the entries
and starts a new file. The device deletes the oldest file and renames the other files to maintain
the configured number of files. To review these files use the Command Line Interface or copy
them to an external server for future reference.

Download support information
This button lets you download system information as a ZIP archive.
In service situations, these reports provide the technician with the necessary information.
13.11.1 Global settings
Using this dialog you enable or disable where the device sends reports, for example, to a Console,
a Syslog Server, or a connection to the Command Line Interface. You also set at which severity
level the device writes events into the reports.
Perform the following steps:
The device buffers logged events in 2 separate storage areas so that the device keeps log entries
for urgent events. Specify the minimum severity for events that the device logs to the buffered
storage area with a higher priority.
Perform the following steps:

Open the
Diagnostics > Report > Global
dialog.

To send a report to the console, specify the desired level in the
Console logging
frame,
Severity
field.

To enable the function, select the
On
radio button in the
Console logging
frame.

To save the changes temporarily, click the button.

To send events to the buffer, specify the desired level in the Buffered logging frame, Severity
field.

To save the changes temporarily, click the button.