Hirschmann GREYHOUND GRS1020, Справочное руководство

Страница: 395 / 619

Access to the device
3.1 Authentication lists
55
UM Config GRS
Release 8.0 09/2019
3 Access to the device
3.1 Authentication lists
When a user accesses the device using a specific connection, the device verifies the credentials of
the user in an authentication list which contains the policies that the device applies for
authentication.
The prerequisite for a user's access to the device management is that at least one policy is
assigned to the authentication list of the application through which access is performed.
3.1.1 Applications
The device provides an application for each type of connection through which someone accesses
the device:

Access to the Command Line Interface using a serial connection: Console(V.24)

Access to the Command Line Interface using SSH: SSH

Access to the Command Line Interface using Telnet: Telnet

Access to the Graphical User Interface: WebInterface
The device also provides an application to control the access to the network from connected end
devices using port-based access control: 8021x
3.1.2 Policies
When a user logs in with valid login data, the device lets the user have access to its device
management. The device authenticates the users using the following policies:

User management of the device

RADIUS
When the end device logs in with valid login data, the device lets the connected end devices have
access to the network with the port-based access control according to IEEE 802.1X. The device
authenticates the end devices using the following policies:

RADIUS

IAS (Integrated Authentication Server)
The device gives you the option of a fall-back solution. For this, you specify more than one policy
in the authentication list. When authentication is unsuccessful using the current policy, the device
applies the next specified policy.