Hirschmann GREYHOUND GRS1020, Справочное руководство

Страница: 362 / 619

User interfaces
1.2 Command Line Interface
22
UM Config GRS
Release 8.0 09/2019
Proceed as follows:

Connect the device to a terminal using the serial interface. Alternatively connect the device to a
COM port of your PC using terminal emulation based on VT100 and press any key.

Alternatively you set up the serial data connection to the device with the serial interface using
the
PuTTY
program. Press the <Enter> key.
Figure 7: Serial data connection with the serial interface using the PuTTY program

Press any key on your terminal keyboard a number of times until the login screen indicates the
CLI mode.

Enter the user name.
The default user name is
admin
.

Press the <Enter> key.

Enter the password.
The default password is
private
.

Press the <Enter> key.
Note: This device is a security-relevant product. Change the password during the first startup
procedure.