Hirschmann GREYHOUND GRS1020, Справочное руководство

Страница: 360 / 619

User interfaces
1.2 Command Line Interface
20
UM Config GRS
Release 8.0 09/2019

Click the
Open
button to set up the data connection to your device.
Depending on the device and the time at which SSH was configured, setting up the connection
takes up to a minute.
When you first login to your device, towards the end of the connection setup, the
PuTTY
program
displays a security alert message and lets you check the fingerprint of the key.
Figure 5: Security alert prompt for the fingerprint

Check the fingerprint.
This helps protect yourself from unwelcome guests.

When the fingerprint matches the fingerprint of the device key, click the Yes button.
The device lets you display the finger prints of the device keys with the command
show ssh
or in
the Device Security > Management Access > Server dialog, SSH tab.
The Command Line Interface appears on the screen with a window for entering the user name.
The device enables up to 5 users to have access to the Command Line Interface at the same
time.

Enter the user name.
The default user name is
admin
.

Press the <Enter> key.

Enter the password.
The default password is
private
.

Press the <Enter> key.
Note: This device is a security-relevant product. Change the password during the first startup
procedure.