Hirschmann GREYHOUND GRS1020, Справочное руководство

Страница: 153 / 619

Switching
[ Switching > Filter for MAC Addresses ]
152
RM GUI GRS
Release 8.0 09/2019
5.3 Filter for MAC Addresses
[ Switching > Filter for MAC Addresses ]
This dialog lets you display and edit address filters for the address table. Address filters specify the
way the data packets are forwarded in the device based on the destination MAC address.
Each row in the table represents one filter. The device automatically sets up the filters. The device
lets you set up additional filters manually.
The device transmits the data packets as follows:

When the table contains an entry for the destination address of a data packet, the device
transmits the data packet from the receiving port to the port specified in the table entry.

When there is no table entry for the destination address, the device transmits the data packet
from the receiving port to every other port.
Table
To delete the learned MAC addresses from the address table, click in the
Basic Settings > Restart
dialog the
Reset MAC address table
button.
Address
Displays the destination MAC address to which the table entry applies.
VLAN ID
Displays the ID of the VLAN to which the table entry applies.
The device learns the MAC addresses for every VLAN separately (independent VLAN learning).
Status
Displays how the device has set up the address filter.
Possible values:

learned
Address filter set up automatically by the device based on received data packets.

permanent
Address filter set up manually. The address filter stays set up permanently.

IGMP
Address filter automatically set up by IGMP Snooping.

mgmt
MAC address of the device. The address filter is protected against changes.

MRP-MMRP
Multicast address filter automatically set up by MMRP.

GMRP
Multicast address filter automatically set up by GMRP.
<Port number>
Displays how the corresponding port transmits data packets which it directs to the adjacent
destination address.