Hirschmann GREYHOUND GRS1020 Скачать руководство пользователя страница 144

Страница: 144 / 619

Network Security

[ Network Security > ACL > Assignment ]

143

RM GUI GRS

Release

8.0

09/2019

4.6.3

ACL Assignment

[ Network Security > ACL > Assignment ]

This dialog lets you assign one or more Access Control Lists to the ports and VLANs of the device.

By assigning a priority you specify the processing sequence, provided you assign one or more

Access Control Lists to a port or VLAN.

The device applies rules successively, namely in the sequence specified by the rule index. You

specify the priority of a group in the

Priority

column. The lower the number, the higher the priority.

In this process, the device applies the rules with a high priority before the rules with a low priority.

The assignment of Access Control Lists to ports and VLANs results in the following different types

of ACL:



Port-based IPv4-ACLs



Port-based MAC ACLs



VLAN-based IPv4 ACLs



VLAN-based MAC ACLs

Note:

Before you enable the function, verify that at least one active entry in the table lets you

access. Otherwise, the connection to the device terminates if you change the settings. To access

the device management is possible only using the CLI through the serial interface of the device.

Table

Group name

Displays the name of the Access Control List. The Access Control List contains the rules.

Type

Displays whether the Access Control List contains MAC rules or IPv4 rules.

Possible values:



mac

The Access Control List contains MAC rules.



The Access Control List contains IPv4 rules.

You edit Access Control Lists with IPv4 rules in the

Network Security > ACL > IPv4 Rule

dialog. You

edit Access Control Lists with MAC rules in the

Network Security > ACL > ACL MAC Rule

dialog.

Port

Displays the port to which the Access Control List is assigned. The field remains empty when the

Access Control List is assigned to a VLAN.

VLAN ID

Displays the VLAN to which the Access Control List is assigned. The field remains empty when the

Access Control List is assigned to a port.

Содержание GREYHOUND GRS1020












































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание GREYHOUND GRS1020

Отзывы:

Похожие инструкции для GREYHOUND GRS1020

Бренды по названию

Популярные бренды

Hirschmann GREYHOUND GRS1020, Справочное руководство

Результаты поиска

Содержание GREYHOUND GRS1020

Отзывы:

Похожие инструкции для GREYHOUND GRS1020

Бренды по названию

Популярные бренды