Hirschmann BAT 11b, Руководство по управлению

Страница: 77 / 128

Configuration: Security
77
BAT 11b
Release 1.0 03/04
• WEP Key 1-4
In the input fields WEP key 1 to WEP key 4, you can enter 4
different WEP keys.
• WEP key to use
The WEP key to use pull-down menu serves to configure the key
(1-4) used by default for sending.
• Deny unencrypted data
With this option, you can determine whether the BAT 11b Wireless
Ethernet should also accept unencrypted packets sent from
clients. Do only activate this function if you are using clients
which do not support encryption.
• Authentication
Open: All clients can log on to the BAT 11b Wireless Ethernet,
independent of the fact whether they transfer data in encrypted
or unencrypted mode.
Shared key: Only clients with activated WEP encryption can log
on to the BAT 11b Wireless Ethernet.
Please note that all subscribers of the same wireless network
have to use the same keys.
If you want to take over the settings made, confirm this by
clicking Save. Otherwise, you can discard the changes by
clicking Cancel. To take over the changes and activate them,
the BAT 11b Wireless Ethernet has to be rebooted.
802.1x Configuration
• Authentication On
Check the checkbox in order to activate authentication according
to IEEE802.1x.
• Radius Server IP Address
Enter the IP address of the RADIUS server to be used.
• Radius Port
If you do not wish to use another port than 1812 for your RADIUS
server, you can change it here.
• Reauthentication Time [min]
The authentication of each client is periodically checked for
validity. The default value is 60 minutes and can be adapted. Very